|
Post by Warhammer_81 on Jun 18, 2022 0:48:15 GMT
|
|
|
Post by benbaer on Jun 18, 2022 12:05:58 GMT
Thank you. the Bounty hunting guild Thanks you^^
|
|
dash96
New Member Lvl 1
Go away sir!
Posts: 3
|
Post by dash96 on Jun 21, 2022 23:17:07 GMT
Hello, First post for me here I've seen some older posts about extracting models from Shadows of the Empire. I've tried to do this myself with not much luck. I want to get the gall spaceport level environment to see if I could upres it with a few procedural upgrades and play around with the look. Does anyone have this model or is capable of extracting it? Here is a look at a test I made inspired by the level.
|
|
|
Post by Warhammer_81 on Jun 22, 2022 18:52:59 GMT
Hello, First post for me here I've seen some older posts about extracting models from Shadows of the Empire. I've tried to do this myself with not much luck. I want to get the gall spaceport level environment to see if I could upres it with a few procedural upgrades and play around with the look. Does anyone have this model or is capable of extracting it? Here is a look at a test I made inspired by the level. That looks like it could be pretty awesome when finished! Unfortunately there aren't any tools to fully extract the models or levels from the game. All we have are model rips taken using Ninja Ripper. I'm not aware of any fully assembled models of the full level maps.
|
|
|
Post by generaldiaz on Jun 22, 2022 19:46:11 GMT
Hello Folks I wonder if anyone has this Model of the meteor q shuttle/mandalorian Dropship Send me a message. I have the model for this. No textures though.
|
|
dash96
New Member Lvl 1
Go away sir!
Posts: 3
|
Post by dash96 on Jun 23, 2022 18:18:41 GMT
Ah, to bad thanks anyways Warhammer_81 Hello, First post for me here I've seen some older posts about extracting models from Shadows of the Empire. I've tried to do this myself with not much luck. I want to get the gall spaceport level environment to see if I could upres it with a few procedural upgrades and play around with the look. Does anyone have this model or is capable of extracting it? Here is a look at a test I made inspired by the level. That looks like it could be pretty awesome when finished! Unfortunately there aren't any tools to fully extract the models or levels from the game. All we have are model rips taken using Ninja Ripper. I'm not aware of any fully assembled models of the full level maps.
|
|
|
Post by dlight on Jun 25, 2022 21:29:12 GMT
dash96 you could just eyeball it. i watched a playthru of the level. i'm sure it's possible to "reconstruct"/reimagine it from that. gotta do some scene building tho. you gotta increase the render distance anyway. it'd look way different with all the canyon walls showing, then. it's not that much in the clouds as you made it look in your render. it looks good tho.
|
|
|
Post by daddylongs on Jun 25, 2022 23:07:59 GMT
I have that one, was just curious if there was any others. 😋 What discord did you get these from This is the link to the Discord server: discord.gg/W3Cc89f9In the thread #free_release You got the updated link to the discord server cause i left before but i want to try to get in again if you know the new discord invite please put it here
|
|
|
Post by rscott on Jun 26, 2022 10:51:34 GMT
Hello, First post for me here I've seen some older posts about extracting models from Shadows of the Empire. I've tried to do this myself with not much luck. I want to get the gall spaceport level environment to see if I could upres it with a few procedural upgrades and play around with the look. Does anyone have this model or is capable of extracting it? There is one here fan made... Jedi Outcast Gall SpaceportThe files are compressed .pk3 ( open with winrar etc...) and the .glm files can be converted with Noesis...Same for the Map .BSP ( might error as the textures are not with this, but can still be exported)
|
|
dash96
New Member Lvl 1
Go away sir!
Posts: 3
|
Post by dash96 on Jun 26, 2022 23:04:14 GMT
dash96 you could just eyeball it. i watched a playthru of the level. i'm sure it's possible to "reconstruct"/reimagine it from that. gotta do some scene building tho. you gotta increase the render distance anyway. it'd look way different with all the canyon walls showing, then. it's not that much in the clouds as you made it look in your render. it looks good tho. Yes I think you are correct dlight . I was hoping to use it for reference geo mainly but oh well Hello, First post for me here I've seen some older posts about extracting models from Shadows of the Empire. I've tried to do this myself with not much luck. I want to get the gall spaceport level environment to see if I could upres it with a few procedural upgrades and play around with the look. Does anyone have this model or is capable of extracting it? There is one here fan made... Jedi Outcast Gall SpaceportThe files are compressed .pk3 ( open with winrar etc...) and the .glm files can be converted with Noesis...Same for the Map .BSP ( might error as the textures are not with this, but can still be exported) Thanks for the share rscott , I will check it out. Noesis looks like a very useful tool!
|
|
|
Post by zandernao on Jun 29, 2022 3:42:11 GMT
Has anyone had any luck with the soft release of the beta for "Star Wars: Hunters" that they've put out in other markets? I know it's a long shot since you'd need an emulator or something to grab it. (currently available in India, Philippines, Malaysia, Indonesia, Mexico & Brazil)
|
|
|
Post by Warhammer_81 on Jun 29, 2022 8:42:03 GMT
Has anyone had any luck with the soft release of the beta for "Star Wars: Hunters" that they've put out in other markets? I know it's a long shot since you'd need an emulator or something to grab it. (currently available in India, Philippines, Malaysia, Indonesia, Mexico & Brazil) Yes and No, you can read about it on the forum thread here: groinkick.freeforums.net/post/7363/threadBasically the current version of UModel only works with some of the game assets, mostly static meshes. It crashes with the models containing skeletal data and animations so no character models can be extracted yet. Upon further investigation the problem may be due to the game's .PAK file being encrypted. Some Unreal Engine games encrypt their .PAK files and assets with an AES Key and cannot be properly decompressed/extracted without it. I'm only able to extract a limited number of models and textures from the v0.13.1 version of the game using the latest version of UModel.
|
|
|
Post by abeja on Jun 30, 2022 6:03:34 GMT
Anyone know how to import .opt models into blender? It is used in the X-Wing Alliance games.
|
|
|
Post by Warhammer_81 on Jun 30, 2022 10:06:26 GMT
Anyone know how to import .opt models into blender? It is used in the X-Wing Alliance games. The easiest way is to use Jérémy Ansel's XWA OPT Editor to convert the .OPT models into .OBJ models and the textures to .PNG files. Then you can import the .OBJ models into Blender.
|
|
grimley
Junior Member Lvl 1
Modeling stuff for Empire at war modding. send help cause ive gone insane from it.
Posts: 55
|
Post by grimley on Jun 30, 2022 23:13:53 GMT
Hello Folks I wonder if anyone has this Model of the meteor q shuttle/mandalorian Dropship Send me a message. I have the model for this. No textures though. its not the one from ROTM is it?
|
|
swlunn
New Member Lvl 1
Posts: 1
|
Post by swlunn on Jul 5, 2022 13:19:49 GMT
I've been animating with Battlefront 2 and Fallen Order models recently, creating my own mini-shorts using mocap(rokoko) but so far i am running into the same problem over and over again and those are the weights, keep in mind i'm a hair above noob status but what i do is take the models from these modern SW games and remove the Armature then insert them into Mixamo spit them out with a Mix-rig on a T-Pose especially since Rokoko mocaps best work with T-poses however again the whole process is a pain because no matter that the mocap bones can be retargeted with the Mixamo rig in Blender, the weights are so bad that i have to redo them all over again since most of the SW characters are not a Spiderman type, they have rigid armor and masks that can't be twisted.
Has anyone tried with these 3d models that can be of help because it's been a nightmare weight painting everything from scratch and i think it's all because i am missing something.
Would really appreciate some advice and apologizes if this doesn't belong here, i'm new and this seemed to be the most relevant thread.
|
|
jaxxon
New Member Lvl 2
Posts: 19
|
Post by jaxxon on Jul 5, 2022 15:38:13 GMT
SWLUNN - The funny thing is if you watch official Star Wars animated shows you see armor bending to rigs, in ways it shouldnt be able to, all the time.
If you are in Blender I often separate any hard bits and link them to the skeleton
|
|
|
Post by marvelousbattles on Jul 7, 2022 1:37:45 GMT
I'm looking for a decent quality core ship with landing gear out.. I already have the core itself though its from the Droid Control Ship (minus the landing gear).. Unsure if there was a version in BF2 or not?...
|
|
|
Post by Rancor022 on Jul 7, 2022 2:54:58 GMT
Unsure if there was a version in BF2 or not?... Nope, unfortunately not.Actually, my mistake, I forgot that there is! I don't believe anyone assembled it yet though.
|
|
|
Post by Warhammer_81 on Jul 7, 2022 2:57:57 GMT
I'm looking for a decent quality core ship with landing gear out.. I already have the core itself though its from the Droid Control Ship (minus the landing gear).. Unsure if there was a version in BF2 or not?... There's one found in The Clone Wars (2002) game by Pandemic Studios though it's not a very high level of detail. I believe the same model is also used as a background object in The Force Unleashed games: There's also one used as a background prop on the Geonosis map for Battlefront II (2017):
|
|
|
Post by marvelousbattles on Jul 7, 2022 3:45:07 GMT
There's one found in The Clone Wars (2002) game by Pandemic Studios though it's not a very high level of detail. I believe the same model is also used as a background object in The Force Unleashed games: There's also one used as a background prop on the Geonosis map for Battlefront II (2017) Thanks for the tip!.. Holy @#$! if I can get the BF2 prop, that'll be ample!.. time to reinstall!!...
|
|
|
Post by Warhammer_81 on Jul 7, 2022 3:52:53 GMT
Thanks for the tip!.. Holy @#$! if I can get the BF2 prop, that'll be ample!.. time to reinstall!!... Yeah, I don't think anyone has released all the background props from Battlefront II (2017)'s Geonosis map. I would love to see the Self-Propelled Heavy Artillery (SPHA) and the Core Ship get released!
|
|
|
Post by Rancor022 on Jul 7, 2022 7:51:43 GMT
Thanks for the tip!.. Holy @#$! if I can get the BF2 prop, that'll be ample!.. time to reinstall!!... Yeah, I don't think anyone has released all the background props from Battlefront II (2017)'s Geonosis map. I would love to see the Self-Propelled Heavy Artillery (SPHA) and the Core Ship get released! The SPHA-T has been in my archive since it was first released!
|
|
|
Post by Warhammer_81 on Jul 7, 2022 9:17:45 GMT
Yeah, I don't think anyone has released all the background props from Battlefront II (2017)'s Geonosis map. I would love to see the Self-Propelled Heavy Artillery (SPHA) and the Core Ship get released! The SPHA-T has been in my archive since it was first released! Oh nice, I'm not sure how I missed that!
|
|
|
Post by marvelousbattles on Jul 7, 2022 11:23:24 GMT
Yeah, I don't think anyone has released all the background props from Battlefront II (2017)'s Geonosis map. I would love to see the Self-Propelled Heavy Artillery (SPHA) and the Core Ship get released! Yeah I've been collecting Geonosis landmarks here & there.. I'm not too confident on obtaining much landscape terrain in BF2 as assuming will be in thousands of random meshes!?.. I will upload whatever I can get my hands on once completed my scene as been meaning to setup a repository for awhile now... The SPHA-T has been in my archive since it was first released! Yes I saw that when browsing earlier.. will come in handy!
|
|
|
Post by BadHorse on Jul 8, 2022 13:28:21 GMT
Thanks for the tip!.. Holy @#$! if I can get the BF2 prop, that'll be ample!.. time to reinstall!!... Yeah, I don't think anyone has released all the background props from Battlefront II (2017)'s Geonosis map. I would love to see the Self-Propelled Heavy Artillery (SPHA) and the Core Ship get released! I didn't realize that the Core Ship had never been released. I've got it assembled now, and after I get a few loose ends tidied up I'll share it. Update: Here it is. It's a packed .blend file, but Blender is free so anyone can open it and unpack the textures and export an FBX if they so choose. Funny thing; the SpatialPrefabBlueprint didn't include the twin left/right bridge structures that are typically a part of the Lucrehulk command towers, and from what I've been able to glean from gameplay videos, they don't appear to be used in the game levels (please correct me if you find evidence to the contrary). The ends of the command towers aren't even closed up where the bridges attach -- just open holes in the mesh. I grabbed the left/right bridge meshes from the Lucrehulk model and added them manually using their transform data.
|
|
|
Post by daddylongs on Jul 8, 2022 17:20:59 GMT
Would anyone happen to have all the models ripped from Star Wars Assault Team? Unfortunately no. So far no one has come forward with the models or the data cache from the game so the only assets we have currently I personally ripped from the last version of the game’s .apk. Since the game servers are shut down we have no way to retrieve the game's data cache. Here is all I got from the game: www.mediafire.com/file/rmr03qvu6mrlkz9/Star_Wars_Assault_Team_Model_Rips.zip/fileIs there anybody who has the updated models of star wars assault team. Because this mobile game is the only mobile game that has the AT-AR and the AT-ST/A. And i would really like thoughs models if its possible
|
|
|
Post by Warhammer_81 on Jul 8, 2022 22:21:52 GMT
Is there anybody who has the updated models of star wars assault team. Because this mobile game is the only mobile game that has the AT-AR and the AT-ST/A. And i would really like thoughs models if its possible Sadly I don't think anyone has a backup of the game data to get the models from. It was listed as a playable game under Amazon's FreeTime Unlimited Subscription Service on the StarWars.com website: support.starwars.com/hc/en-us/articles/360000963023-STAR-WARS-Assault-Team-is-available-on-Amazon-FreeTime-UnlimitedA few years ago I signed up to the service for a month to try it out for free but I couldn't find the game listed on the app. After failing to find it listed I cancelled the service and have never tried it again. I believe the game is no longer available and they simply haven't updated their web page listing. The game servers hosting all the game data are fully shut down so there isn't any way to play the game on any service regardless of the listing claims found on StarWars.com. Unless someone shows up with an archive of the game data you're completely out of luck.
|
|
|
Post by cpoeschl on Jul 14, 2022 23:26:40 GMT
Does anyone know how to rip the episode 3 game models or where to get them?
|
|
|
Post by Warhammer_81 on Jul 15, 2022 2:14:58 GMT
Does anyone know how to rip the episode 3 game models or where to get them? There isn't an entire dump containing all the game models but you can get quite a few of the character models Acewell dumped here: groinkick.freeforums.net/post/4631
|
|